Featured Video
Key Features
- Robust GNSS receiver with integrated antenna
- Dual band L1 + L2 receiver
- Multi constellation GNSS receiver.
- Submersible, 50m rated
- Wide area corrections or external RTCM
- Internal and external shock mounts
- Worldwide RF remote wireless data options
- Atlas correction option
- External battery option
- Internal AHRS option
Our RFR Receiver can be used to support this product.
Applications
- Seismic streamer head and tail positioning
- Seismic source positioning
- Ideal for subsea excavation vehicles (jetting & trenching), and surface positioning of towed sensors such as magnetometers, operating in shallow waters
Technical Specification
MODEL VARIANTS
Housing material:
White Acetyl
Bracket
A4 Stainless steel
Depth rating
50m
Dimensions
170mm x Ø115mm
Weight
1.95kg
Model Part Number
GNSS Receiver
AHRS
External RF
Antenna
RF Range
BCN-101G
Yes
No
No
800m
BCN-101GA
Yes
Yes
No
800m
BCN-101A
No
Yes
No
800m
BCN-101G-EXT
Yes
No
Yes
2000m
BCN-101GA-EXT
Yes
Yes
Yes
2000m
SPECIFICATION
Configuration
Receiver type:
GNSS Multi-frequency L1 & L2, RTK with carrier phase
GNSS compatibility:
GPS, GLONASS, BeiDou, QZSS & GALILEO
Channels:
372
SBAS tracking:
3 channel parallel tracking
Differential options:
SBAS, Autonomous, External RTCM (V3.2) or CMR, RTK, L-Band (Atlas) DGPS
Accuracy (Dependent on corrections):
Accuracies dependent on multipath environment, number of satellites in view, geometry and ionospheric conditions.
RMS 67%
Horizontal
Vertical
RTK
8mm + 1 ppm
15mm + 2ppm
SBAS (WAAS)
0.3m
0.6m
Unaided
1.2m
2.4m
Atlas H10
0.04m
n/a
Atlas H30
0.15m
n/a
Atlas H100
0.50m
n/a
Warm up time (Typical):
From cold
<60s (No almanac or real time clock)
Warm start
<30s (Almanac & RTC, no position)
Hot start
<10s
Connectivity
Connector
8 pin MCBH connector (male)
Power
18-36VDC
24v 160mA nominal
Communication
RS232 (2 bi-directional ports)
RS485 (2 wire bi-directional)
RS485 (4-wire)
Position protocol
NMEA 0183 protocols supported, (GPGGA, GPRMC & GPGLL standard)
Refresh rate
10Hz standard, 20Hz optional
Correction I/O protocol
Hemisphere GNSS proprietary, ROX Format, RTCM v2.3 (wired only),
RTCM v3.2, CMR, CMR+
1pps
3.3V, 1ms pulse width, 20mA optional
Accessories/options
- Wireless modem data receiver (for up to 4 x 101G MiniPods): Part number RFR-101G
- Integrated AHRS for MiniPod BCN-101GA, BCN-101A or BCN-101GA-EXT;
Bearing resolution: 0.1° displayed. Internally calculated to 0.01°
Heading sensor accuracy: 0.5° RMS standard; ±0.1° resolution/repeatability
Pitch/Roll sensor accuracy: ±0.10° RMS ±0.1° resolution/repeatability - External battery: Part number BPK-101G, 10 day operational life, non-rechargeable.
Part number BPK-101G-R, rechargeable
With interconnect lead, part number, BPK-101G-4000, 3m standard. - External RF antenna for MiniPod BCN-101G-EXT or BCN-101GA-EXT;
Omni-directional: Part number BCN-101G-4003. Directional: Part number BCN-101G-4002
Compatible products
Featured Video
Key Features
- Robust GNSS receiver with integrated L1 +L2 antenna
- Submersible, 1000m rated
- Dual Band, multi constellation GNSS receiver
- Wide area corrections or external RTCM
- Internal and external shock mounts c/w mounting bracket
- Atlas correction option
- Worldwide RF remote wireless data options
Our RFR Reciever can be used to support this product.
Applications
- GNSS surface positioning for deep water-rated platforms such as AUV’s and ROV’s
- Subsea excavation vehicles (jetting & trenching), and surface positioning of towed sensors such as magnetometers, operating in shallow waters
- Seismic streamer head and tail positioning
- Seismic source positioning
Technical Specification
MODEL VARIANTS
Housing Material:
White Acetyl
Bracket
A4 Stainless Steel
Depth rating
1000m
Dimensions
218mm x Ø125mm
Weight
2.5kg
Model Variants
Model Part Number
GNSS Receiver
AHRS
RF Range
BCN-103G
Yes
No
800m
BCN-103GA
Yes
Yes
800m
BCN-103A
No
Yes
800m
Configuration
Receiver Type
GNSS Multi-frequency L1 & L2, RTK with carrier phase.
GNSS Compatibility
GPS, GLONASS, BeiDou, QZSS & GALILEO
Channels
372
SBAS tracking
3 channel parallel tracking
Differential options
SBAS, Autonomous, External RTCM (V3.2) or CMR, RTK, L-Band (Atlas) DGPS
Accuracy (Dependent on corrections)
Accuracies dependent on multipath environment, number of satellites in view, geometry and ionospheric conditions.
RMS 67%
Horizontal
Vertical
RTK
8mm + 1 ppm
15mm + 2ppm
SBAS (WAAS)
0.3m
0.6m
Unaided
1.2m
2.4m
Atlas H10
0.04m
n/a
Atlas H30
0.15m
n/a
Atlas H100
0.50m
n/a
Warm up time (Typical):
From cold
<60s (No almanac or real time clock)
Warm start
<30s (Almanac & RTC, no position)
Hot start
<10s
Connectivity
Connector
8 pin MCBH connector (male)
Power
18-36VDC
24v 160mA nominal
Communication
RS232 (2 bi-directional ports)
RS485 (2 wire bi-directional)
Position Protocol
NMEA 0183 protocols supported
Refresh Rate
1Hz standard, 10Hz, 20Hz optional
Correction I/O protocol
Hemisphere GNSS proprietary, ROX Format, RTCM v2.3 (wired only),
RTCM v3.2 (wireless), CMR, CMR+
1pps
3.3V, 1ms pulse width, 20mA optional
OPTIONS
- Wireless modem data receiver # RFR-101G
- Battery Pack # BPK-107GS, 3000m depth rated power pack.
- Integrated AHRS
Bearing resolution: 0.1° displayed. Internally calculated to 0.01°
Heading sensor accuracy: 0.5° RMS standard; ±0.1° resolution/repeatability
Pitch/Roll sensor accuracy: ±0.10° RMS ±0.1° resolution/repeatability
applied acoustics
aae technologies
1
3